Questions and Answers from BARTON Experts

Customers and community members often have technical and application questions about the proper selection, performance, and use of BARTON abrasives and waterjet parts.

In addition to the information found elsewhere on this website, this section is provided by various experts at The BARTON Group regarding topics that have come up frequently in conversation with customers. We hope you find the information helpful. Of course, if you have a question that’s not addressed in this section, don’t hesitate to call 800-741-7756. BARTON customer service professionals are always ready to answer your questions.

How do I fill the BARTON Abrasive Transfer Hopper?

Instructions for adding garnet to your abrasive transfer hopper are listed below. Click here to download complete instruction and usage guide.

1. Confirm that the valve at the bottom of the hopper is closed.
2. Remove the lid from the hopper. To avoid injury, removal as well as any other substantial manipulation
of the lid should be done with two people.
3. Using a forklift, lift the 2,200 or 4,400-pound bulk bag of garnet abrasive over the top of the hopper.
Carefully follow FIBC Bulk Bag Handling Guidelines in handling the bulk bag. The following link provides
detailed information regarding the safe handling of bulk bags, http://fibca.com/.
4. Untie the outer duffle on the bottom of the bulk bag, and pull the release cord on the spout to empty
the entire contents of the bulk bag in the hopper. Stand to the side of the bulk bag and be careful to
avoid falling material released from the bag.
5. Place the lid back on top of the hopper (the lid should be lifted by two people to avoid injury).

Placing the hopper on the stand:
1. Place the forks of the forklift inside both fork pockets on the bottom of the hopper. The forks should
extend to, or near, the end of the fork pockets.
2. Lift the hopper slowly until the hopper is slightly higher than the top of the stand (approximately 60”).
3. Center the hopper over the top of the stand ensuring the hopper is placed evenly between the outer lip
of the sides of the stand. The hopper should be placed all the way to the back stop of the stand.
4. Ensure the hopper is level before lowering the hopper onto the stand.
5. Lower the hopper slowly onto the stand.
6. Ensure the hopper is placed correctly on the stand before backing away from the hopper.
7. Connect the hopper to the stand by installing the two 5/8” x 8.5” hitch pins through the slots in each
side of the stand, making sure that the pin goes completely through the fork pocket.
8. Install the lynch pins in the hole at the end of each 5/8” x 8.5” hitch pins.

Click here to download complete instruction and usage guide.

What is the shelf life of garnet abrasives? Is there an expiration date?

BARTON garnet abrasives are naturally occurring minerals that do not contain chemical additives. There are no product expiration dates. However, proper storage methods need to be followed. Store abrasives in a cool dry place; preferably indoors. Keep container/package tightly closed and in a well-ventilated place without large temperature swings to prevent condensation. Abrasives stored in FIBC’s – flexible intermediate bulk containers, commonly called bulk bags, must be kept out of direct sunlight as UV light can deteriorate FIBC’s that are intended to be single use bags. Learn more about FIBC safe handling guidelines.

What are the advantages of using an abrasive bulk hopper and bulk bags?

Bulk bags provide the advantage of loading the abrasive hopper in one shot as compared to 55 LBS at a time with paper bags. The risk of paper bag contamination is also eliminated. Proper handling of bulk bags may also reduce the possibility of injuries related to handling paper bags. FIBC guidelines must be followed when handling bulk bags, and the bulk hopper must be installed properly. Installation guidelines for the BARTON abrasive hopper.

Should I pre-screen my abrasive? Why?

Our manufacturing processes are built on strict, comprehensive quality control standards to ensure the proper particle size distribution (PSD) and abrasive quality. However, when opening paper bags, fibers or contaminants could be introduced into the abrasive. Therefore, we recommend screening the garnet to help capture these particles.

What is the proper way to store abrasives?

Store BARTON abrasives in a cool dry place; preferably indoors. Keep container/package tightly closed and in a well-ventilated place without large temperature swings to prevent condensation. Abrasives stored in FIBC’s (flexible intermediate bulk containers, commonly called bulk bags) must be kept out of direct sunlight as UV light can deteriorate FIBC’s that are intended to be single use bags. Learn more about FIBC safe handling guidelines.

Can I stack pallets of abrasives?

Pallets of BARTON abrasive products are labeled Do Not Double Stack to ensure the highest protection of goods while in transit to customers. We recommend using a slip sheet between pallets if you stack pallets at your place of business.